Epson RC170 Guia do Utilizador descarregar pdf (Página 267)

100

101

11. Remote Control

EPSON RC+ 5.0 (Ver.5.4) User's Guide Rev.4 249

11.2 Remote Control Input Output Configuration

This is the procedure to assign the remote functions to the I/O.

1. Select Controller from the Setup Menu and select the Remote Control Inputs or

Remote Control Outputs page.

2. For each input or output you want to use for remote control, click on the Input # or

Output # cell for the desired signal, then click the arrow and select a bit number.

3. Click OK to save the new settings.

For details of dialog setting, refer to 5.12.2 Controller Command (Setup Menu).

11.3 Control Device Configuration

This is the procedure to set the control device to “Remote I/O”.

1. Set the controller control device to Remote. Select Controller from the Run Menu,

click on Configuration in the tree on the left, then select “Remote I/O” from the Control

Device dropdown list.

2. Click Apply to save the new setting and the click Close.

For details of setting, refer to 5.12.2 Controller Command (Setup Menu).

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 311 312

Comentários a estes Manuais

Sem comentários

Epson RC170 Guia do Utilizador Página 267

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Epson RC170