Epson TM-T88II Series Manual de Instruções Página 76

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 75
Rev. A Handling, Maintenance, and Repairs 3-9
TM-T88 Series Technical Manual
Maintenance Procedures
The inspection procedures described here are divided between two types: daily inspection,
which can be performed by the individuals who use the unit on a daily basis, and periodic
inspection, which should be performed by individuals who have a more detailed technical
knowledge of the unit.
Inspection item Action
Setup Check for proper connection of cables.
Check for proper installation of roll paper.
Make sure the roll paper cover and cutter
cover are closed.
Reconnect any cables that have come
loose.
Correctly install roll paper.
Close all covers.
Paper particles, paper
scraps, foreign matter
Open the roll paper cover and make sure
there are no large pieces of paper or other
foreign matter present.
Clean out any paper or foreign matter.
Inspection item Action
Dirt, lint and dust inside
components
Check for dirt, lint, and dust in the paper
path.
Check for any foreign matter on the
surface of or in the paper end sensor.
Check if the platen roller has become
white with paper particles.
Use a vacuum cleaner to completely
remove all dirt, lint, and dust.
Wipe away foreign matter with paper or
some other soft material.
Wipe off the roller moistened with water.
Springs Check the frame shutter spring and all
other springs for deformation and
disconnection.
If a problem is discovered, correctly install
the spring or replace it with a new one.
Lubrication Check to make sure that all components
are properly lubricated.
Lubricate any component as required.
Operation Check for abnormal noise during
operation and any abnormal printing.
Correct any problems in accordance with
the Troubleshooting Guide in chapter 4.
Vista de página 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 153 154

Comentários a estes Manuais

Sem comentários