
Rev. A Handling, Maintenance, and Repairs 3-1
TM-T88 Series Technical Manual
Chapter 3
Handling, Maintenance, and Repairs
Handling
Transport Precautions
Take the following steps to protect the unit against vibration and impact whenever
transporting it:
CAUTIONS:
❏
We recommend that each unit be packed individually in the boxes supplied by
EPSON.
❏
Remove the paper from the unit.
❏
Make sure that the roll paper cover is securely closed.
Setup Precautions
Note:
The cover of the unit is secured in place with tape. Remove the tape before using the unit.
Operational Precautions
Observing the following operational precautions protects the unit against damage.
CAUTIONS:
❏ The back of the unit is equipped with a grounding screw. Be sure to use this screw to ground
the unit before using it.
❏ Connect the interface cable, power cable, and drawer cable to the applicable connectors of
the unit. Do not use undue force when plugging cables into connectors.
❏ Do not turn unit power off during normal operation. Be especially careful to avoid turning
power off while a paper cut operation is being performed. Doing so can result in the cutter
blade being exposed, which will make it impossible to open the roll paper cover.
❏ Never pull out paper while the roll paper cover is open.
❏ During normal operation, never open the cutter cover and rotate the cutter manual knob by
hand. Doing so can cause the cutter blade to be exposed, making it impossible to open the
roll paper cover.
Comentários a estes Manuais