Epson TM-T88II Series Manual de Instruções descarregar pdf (Página 17)

Rev. A Features and General Specifications 1-5

TM-T88 Series Technical Manual

CAUTION

Paper must not be pasted to the paper roll spool.

Printable Area

Note:

The print position within the printable area of the thermal elements for dots 257 to 512 is shifted

approximately 0.07 mm (.003") in the paper feed direction from the position for dots 1 to 256. Be

sure not to print a ladder bar code across both printable areas, as this can cause variations in

printing which are difficult to read.

Paper roll size:

Roll diameter: Maximum 83 mm

Take-up paper roll width: 80 + 0.5/-1.0 mm (3.15" + 0.02"/-0.04")

Paper roll spool diameter: Inside: 12 mm (.47")

Outside: 18 mm (.71")

Paper roll The printable area of a paper with width of 79.5 ± 0.5 mm

(3.13" ± 0.02") is 72.2 ± 0.2 mm (2.84" ± 0.008") (512 dots)

and the space on the right and left sides are

approximately 3.7 mm (0.146").

Figure 1-2 Printable area

Figure 1-3 Shifting of the print position

a = 79.5 ± 0.5 mm (3.13" ± 0.02")

b = 0.141 mm ± 0.05 mm (.006" ± .002")

c = 72.2 mm ± 0.2 mm (2.84 ± .008")

d = 3.7 mm (0.146”)

e = 3.7 mm (0.146”)

[All the numeric values are typical.]

Approximately 0.07mm (0.0028")

1 256

257 512

Approximately 0.07 mm (0.0028")

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 153 154

Sem comentários

Epson TM-T88II Series Manual de Instruções Página 17