Epson LX-86TM Especificações descarregar pdf (Página 84)

REV.-A

4.2.2.2 Control Panel (LCPNL Board) Removal (Figure 4-4)

1. Remove the upper case. (Refer to Section 4.2.2.1)

2. Turn the upper case over, push the two notches securing the control panel to the upper case

inward, and remove the control panel from the upper case.

WARNING

When mounting and removing the control panel, be careful not to damage the

FPC

of the control

panel with the

FPC

guide of the upper case.

Guide

Fig. 44. Control Panel Removal

4.2.3 Removal of Electric Circuit Boards

This section describes the

ROCX

board and ROC filter unit removal.

4.2.3.1

ROCX Board Removal

1. Remove the upper case. (Refer to Section 4.2.2.1)

2. Disconnect connectors CN5, CN4, CN6, CN7, and CN8 on the

ROCX

board, which connect each

component to the

ROCX

board.

WARNING

When disconnecting the connectors, pull them out slowly while holding the board. The board could

be damaged if the connectors are pulled out roughly.

4-5

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 141 142

Sem comentários

Epson LX-86TM Especificações Página 84