Epson LX-86TM Especificações descarregar pdf (Página 82)

REV.-A

4.2 DISASSEMBLY AND ASSEMBLY

This chapter describes disassembly of the LX-800. Assembly can be performed by simply reversing

the order of disassembly, with special notes for assembly mentioned as “ASSEMBLY POINTS.” For

assembly and disassembly procedures which require adjustment, the necessary adjustment is indicated

as “ADJUSTMENT REQUIRED.” After assembly and disassembly, perform the necessary adjustment

as indicated.

WARNING

. Read Section 4.1 (GENERAL REPAIR INFORMATION) before disassembly.

. Remove paper and the ribbon cartridge before disassembly.

The disassembly sequence of this section is grouped into five parts:(1) removal of

printhead, (2) removal

of cases, (3) removal of the electric circuits boards, (4) removal of printer mechanism unit, and (5)

disassembly of printer mechanism.

Ref~to

Figures A- 16 through A- 18, the LX-800 exploded diagrams and the printer mechanism exploded

diagram.

4.2.1 Removal of Printhead (Figure 4-1)

Remove the printer cover, and confirm that the paper and the ribbon cartridge have been removed.

2. Unlock the two levers securing the

printhead

to the carriage, by pulling them down, and lift the

printhead

to remove it.

Fig. 4-1. Printhead Removal

3. Disconnect the head cable from the connector on the

printhead.

4-3

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 141 142

Sem comentários

Epson LX-86TM Especificações Página 82