Epson V11H295020 - PowerLite 85 XGA LCD Projector Guia do Utilizador descarregar pdf (Página 73)

Using the Projector on a Network 73

9. Select Internet Protocol and click the Properties button. You

see this screen:

10. If your access point uses DHCP, select

Obtain an IP address

automatically

. Otherwise select Use the following IP address

and enter the required information:

■ IP address: Type in the IP address you want to assign to the

computer. It must be formatted like other addresses on the

network. The last section must be unique.

■ Subnet mask: For example: 255.255.255.000, but this

depends on how your network is set up.

■ Default gateway: Enter the IP address that was assigned to

the access point when it was set up.

■ Preferred DNS server/Alternate DNS server: Enter the IP

address of the DNS server(s) for your network.

11. When you’re done, click

OK.

12. Click the

Wireless Networks tab.

(If you don’t see this tab, you may need to enable your wireless

card or adapter by clicking

Configure to access the device

note

For specific details about

your network, please consult

your network administrator.

note

If you don’t know your

gateway or access point

address, see page 75.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 174 175

Sem comentários

Epson V11H295020 - PowerLite 85 XGA LCD Projector Guia do Utilizador Página 73