Epson IR-320 Manual do Utilizador descarregar pdf (Página 20)

8 IR-320 User’s Manual

English

Re-setting the BIOS

If the built-in battery is replaced, the settings of the real-time clock and

the CMOS will be lost. In this case, follow the procedures below to set

the BIOS again.

1. Connect an external keyboard to the keyboard/mouse connector

of the IR-320.

2. Turn on the IR-320.

3. While the following message is displayed, press the Del key.

Press DEL to enter SETUP.

4. The BIOS setup utility is started. You need to do the following

three actions for the BIOS setup utility:

• Load the setup default.

• Set the Date/Time.

• Set the battery unit (OI-R03).

5. Load the setup default (already adjusted in advance so that the

IR-320 can operate at its best).

• Select “Load Optimized Defaults” with the cursor key; then

press the Enter key.

• When “Load Optimized Defaults (Y/N)?” is displayed, press

the Y key; then the Enter key. The setup default is loaded.

• Press the Esc key to return to the main menu.

6. Set the Date/Time.

• Select “Standard CMOS Features” with the cursor key; then

press the Enter key.

• Select the item of “Date/Time” with the cursor and change the

setting with the PageUp key and PageDown key.

• When the setting is complete, press the Esc key to return to the

main menu.

7. Set up the battery unit. If it is not installed, you do not need to do

the following:

• Select “Power Management Setup” with the cursor; then press

the Enter key.

• Select “System Battery” with the cursor key.

• Change the setting to “Equipped” with the PageUp key.

• When the setting is complete, press the Esc key to return to the

main menu.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 127 128

Sem comentários

Epson IR-320 Manual do Utilizador Página 20