Epson TM-J8000 Especificações descarregar pdf (Página 21)

Rev. A Specifications 1-7

TM-J8000/J8000P Technical Manual

Confidential

DIP switches

Serial interface model

(BPS: Bits Per Second)

Note: Changes in DIP switch settings (excluding switches 2-7 and 2-8, interface reset signals) are recognized only

when the printer power is turned on or when the printer is reset by using the interface. If the DIP switch

setting is changed after the printer power is turned on, the change does not take effect until the printer is

turned on again or is reset.

Table 1-8 DIP switch 1

SW 1 Function ON OFF

1 Data reception error Ignored Prints “?”

2 Receive buffer capacity 45 bytes 4K bytes

3 Handshaking XON/XOFF DTR/DSR

4 Word length 7 bits 8 bits

5 Parity check Yes No

6 Parity selection Even Odd

7 Transmission speed selection

Refer to Table 1-9

Table 1-9 Transmission speed

Transmission Speed[BPS] SW 1-7 SW 1-8

2400 ON ON

4800 OFF ON

9600 ON OFF

19200 OFF OFF

Table1-10 DIP switch 2

SW 2 Function ON OFF

1 Handshaking (BUSY condition) Receive buffer full Offline or

receive buffer full

2 Customer display (DM-D) connection Connected Not connected

3 Head rank switching Rank B Rank A

4 Power switch mode setting Power switch fixing

mode

Normal mode

5 Interlocking operation with IM Interlocking Not interlocking

6 Internal use — Fixed to OFF

7 I/F pin 6 reset signal Enabled Disabled

8 I/F pin 25 reset signal Enabled Disabled

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 189 190

Sem comentários

Epson TM-J8000 Especificações Página 21