Epson Subli-Print 4450 Informações Técnicas descarregar pdf (Página 21)

Installing the Heat Press

** You will need assistance to complete this section. The press requires two people to remove

it from the box **

Please refer to the instruction manual supplied with the Heat Press for full operation

instructions.

1. Remove the Heat press from the box.

Note: We strongly recommend retaining this reinforced box in case the press

ever needed to be returned at a later date.

2. 2. Insert the power cord here and

ideally plug directly into a 13amp

socket.

3. Raise the handle of the press to open the

press. To open the press, first you need to

release the safety catch circled in red.

Basic Press Operation

i) The press is opened and closed

releasing the Handle Release Knob

and opening or closing the Machine

Operating Handle. (Fig. 1)

ii) The pressure is adjusted by turning

the pressure adjusting knob

clockwise for more pressure and

anticlockwise for less pressure. (Fig. 1)

4. Turn the press on using the

power On/Off Switch

Caution:

Never increase the pressure to the

extent of requiring undue force to

lower the toggle/heat plate assembly

into the lock position, as this will

place excessive stress on the press

frame, resulting in permanent

damage to the press.

Fig. 1

1 2 ... 16 17 18 19 20 21 22 23

Sem comentários

Epson Subli-Print 4450 Informações Técnicas Página 21