Epson M119D Manual do Operador descarregar pdf (Página 27)

Setting Up the Printer 1–19

Model with Serial Interface DIP-Switch Functions

CAUTION:

Do not change the settings of switches 2-2 and 2-4 (always

on). Changing these settings may cause inferior print quality.

DIP Switch Set 1

Switch Function ON OFF

1-1 Data reception error Ignored Prints ”?”

1-2 Receive buffer capacity 40 bytes Approximately

1K byte

1-3 Handshaking XON/XOFF DTR/DSR

1-4 Word length 7 bits 8 bits

1-5 Parity check Yes No

1-6 Parity selection Even Odd

1-7 Baud rate 4800 BPS 9600 BPS

1-8 Busy condition

Receive buffer full

Off line or

receive buffer

full

DIP Switch Set 2

Switch Function ON OFF

2-1 Print column selection

7 × 9 font/9 × 9 font

42/35 40/33

2-2 Reserved. Setting must not be changed. (Fixed to ON)

2-3 I/F pin 6 reset signal Enabled Disabled

2-4 Reserved. Setting must not be changed. (Fixed to ON)

200b-ops.book : 200bo1r2.fm Page 19 Monday, September 22, 1997 11:46 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sem comentários

Epson M119D Manual do Operador Página 27