Epson EX-1000 Guia do Utilizador descarregar pdf (Página 20)

PAPER HANDLING

The following sections describe the ways in which you can control paper

feeding, etc by means of the front panel controls:

Form feed

A form feed can be achieved from the front panel in the following way:

1 Put the printer off-line, by pressing the

\ ONL%:~ button, so that the

indicator is extinguished.

2 Press the PAPERFEED’ button, and keep it depressed.

3 Press the LzE button momentarily.

4 The paper will then move forward to the top of the next sheet (fanfold

paper), or eject a cut sheet.

5 Set the printer on-line again (:oNG+F> button) to resume printing.

Paper parking

Paper parking is useful if you are using fanfold paper, and you want to print

a document on one or two sheets of cut-sheet paper. The printer “parks” the

fanfold paper safely out of the way, so that you do not need to unload the

paper before inserting cut-sheet paper, then, when you have finished

printing on cut-sheet paper, moves the fanfold paper back to its original

position so that you can restart printing.

To use this facility, follow the instructions below:

1 Put the printer off-line (press the

0~ LINE \ button, so that the indicator goes

out).

2 Press the WYP*RI, button, so that the fanfold paper is moved out of the

paper path.

3 Now move the release lever to the rear of the printer ( h position) to select

cut-sheet paper (disengaging the fanfold sprockets).

NOTE

If you do not move the release lever at this stage, the printer will warn you

at the next step by emitting a continuous series of beeps.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 117 118

Sem comentários

Epson EX-1000 Guia do Utilizador Página 20