Epson C82314 Guia do Utilizador

EPSON®CoaxInterface CardC82314 ✽USER’S GUIDEBEDIENUNGSANLEITUNGMODE D’EMPLOIGUÍA DEL USUARIOMANUALE PER L’UTENTE

INTERFACE CONFIGURATIONAfter installing the interface card and performing a self-test, the interface is readyto operate in most environments. The fact

If a coax host Is not available and basic setup selections need to be changed, theinterface has the option of a push button setup as defined in Append

to’ access all of the Epson features such as color printing, superscripts; andsubscripts.Command-Pass-Thru is accomplished by converting the printer c

Valid characters for hex codes are 0-9 and A-F (upper case letters only).No spaces are allowed in the command between the ‘delimiter sequence&% an

Another method of Transparent Data Transmission is the Xerox defined SCS TRNcode 36. Generally accepted for use in laser printer applications, this me

PARALLEL INTERFACE SPECIFICATIONThe C82314* coax interface provides a Centronics parallel data input port to allowautomatic sharing of the Epson print

SignalReturnSignal ParallelDirectionDescriptionPinPin CablePin1129 BUSY11OUTA HIGH signal indi-cates that the prin-ter cannot receivedata. The signalg

SignalPinReturnPinSignalParallelCablePinDescriptionDirectionIN31INIT16Defined to resetand dear theprinter when LOW;THE RESET ANDCLEAR ARE NOTSUPPORTE

Data transfer is carried out by observing the ACKNLG or BUSY signals.Datatransfer to the printer occurs only after receipt of the ACKNLG signal or wh

HP FONT IDENTIFIER CODESWhen Command 60 (see Appendix A, command 60) of the interface is used toselect HP LaserJet emulation, font changes can be acco

COPYRIGHT NOTICE:All rights reserved. No part of this publication may be reproduced, stored in aretrieval system, or transmitted in any form without t

COMPUTER OUTPUT REDUCTION (COR),HP EMULATIONThe landscape printing capability of the HP LaserJet emulation enables theinterface to automatically print

AUTOMATIC PRINT ORIENTATION (APO),HP EMULATIONWhen Automatic Print Orientation (APO) is specified active (see Appendix A,command 61), the coax interfa

regardless of whether the user specified a portrait font ID. You should be awareof the significance of the specified form size (as defined by the MPP

APPENDIX A: HOST DOWNLOAD CONFIGURATIONCOMMANDSThis appendix defines the configuration commands which may be used to selectsetup values for the print

APPENDIX A: HOST DOWNLOAD CONFIGURATIONCOMMANDS Table of Contents COMMANDDESCRIPTIONPAGE0102030405060708091112131415161718192025262731323435363738404

APPENDIX A:HOST DOWNLOAD CONFIGURATIONCOMMANDSPaqe 2 of the Table of ContentsCOMMANDDESCRlPTIONPAGE505155565760616263646570719899Parallel Port Timeout

COMMAND 1: BUFFER SIZESelects logical default buffer sizeVALUE DESCRIPTION1960 characters*21920 characters32560 characters43440 characters53564 ch

COMMAND 3: CHARACTERS PER INCHSelects default CPIVALUE DESCRIPTION0No default sent to printer*1010 CPI1212 CPI1515 CPI1616.7 CPINOTE:The IBM host cont

COMMAND 6: MAXIMUM PRINT POSITIONSelects current and default Maximum Print Position, the maximum number Ofcharacters which can be printed on each line

COMMAND 8: LU1 LANGUAGESelects default LU1 Language.VALUEDESCRIPTION* 0103040506070809101112 (same as 11)1314151617 (same as 16)1920212223 (same as 07

FCC COMPLIANCE STATEMENTFOR AMERICAN USERSThis equipment has bean tested and found to comply with the limits fora Class A digital device. pursuant to

COMMAND 9: FONT SELECT (Matrix Printer]Selects Epson default font when dot matrix printer protocol is selected inCommand 60. This command is not funct

NOTES: This command defines the default paper source for the PagePresentation Media (PPM) Host command in SCS mode. If the PPMcommand is received from

COMMAND 13: FORM FEED AFTER LOCAL SCREEN COPYSpecifies whether a Form Feed is performed after a local screen hard copy.VALUE DESCRIPTION*0No Form Feed

Command 14, Values 0 and 1 are only functional from CUT terminals.EXAMPLE: &%Z14,3Prints true screen image In non-SCS print and localcopyCOMMAND 1

COMMAND 17: VALID FF FOLLOWED BY DATASets the printer in accordance with the RPQ installed in the control unitVALUE DESCRIPTION* 0Second print positio

Do not press the form feed or line feed buttons on the front of theprinter. This will cause the host and printer to lose synchronization ofpaper posit

COMMAND 25: FORM FEED USAGEEnables a Forms Feed from the host system to be converted to the requirednumber of line feeds (beneficial when forms length

VALUE DESCRIPTION*0No extra FF is sent1Send FF after time out valueNOTES: The time-out value is the same as the time-out used to switch betweenhost an

COMMAND 34: INTERVENTION REQUIRED (IR) TIME OUTSets the time interval before an intervention required signal is sent to the hostafter a printer error

COMMAND 36: SUPPRESS IBM CONTROL CODESThis function is used to select suppression of all or some IBM control codessent from the host system.VALUE DESC

COAX INTERFACE CARD C82314*USER’S GUIDESCHNITTSTELLENDARTE COAX C82314*BEDIENUNGSANLEITUNGCARTE D’INTERFACE COAX C82314*MODE D’EMPLOITARJETA DE INTERF

COMMAND 38: TRUE LPI SPACING (LASER)Because laser printers have a non-printable border around the edge of single-sheet pages, 6-LPI and 8-LPI spacing

COMMAND 41: COMMAND ID CHARACTERSpecifies the character which can be used for the command identifier (in placeof "Z" which follows the ‘Lead

COMMAND 45: SCS TRN TRANSLATESpecifies how transparent data sent using SCS code 35 is handled.VALUE DESCRIPTION0Binary Transparent* 1Emulate IBM 3287

Because the printer is being shared between the parallel port and the3270 host, careful attention should be paid to setting up the PC sothat jobs are

COMMAND 55: CUSTOM USER STRINGSAllows a coax user to define up to six custom user strings, of up to 25 byteseach, which are stored in the memory of th

COMMAND 56: SHARED PORT INlTlALlZATlON STRINGAllows the user to define an initialization string of up to 25 bytes which arestored in the memory of the

NOTES: To aid in readability, a single space is allowed between hex bytes butis not included in the string.The coax port initialization string is only

EXAMPLE: &%Z61 ,1APO is not active.COMMAND 61: AUTOMATlC PRINT ORIENTATION (APO) (LASER)Laser printers automatically control page orientation if t

3User Defined mode; documents are printed using the fontsand orientation that the user specifies through use of the &%font ID commands.EXAMPLE: &a

EXAMPLE: &%Z64,1Specifies all printing performed using paper from themanual feed slot be printed in portrait orientation.COMMAND 65: CHARACTER SET

EPSONCoax Interface Card C82314*User’s GuideIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1G

NOTES: Previously stored substitutions are automatically changed to the newselection when the same hex location is specified in the EBCDICtable.Previo

VALUE DESCRIPTION0Restores the factory defaults to the NV memory of theinterface.1Prints out the active setup selections for review by the user.2Resto

APPENDIX B: PUSH BUTTON SETUPPush button (Yes / No) setup provides an alternate method for a user to select thebasic configuration selections for the

grouped together with periodic opportunities to end push button setup providedat the end of each group.Following is the summary list of the push butto

*Single (6 or 8 LPI) = Default SpacingDo you want this changed? (Yes I No)Alternate Selections:(Reference Command 4)*Double (3 or 4 LPI)* Single (6 or

* French* Austrian / German (alt)* International* Italian* Japanese (English)* Spanish* Span&h (alt)* Spanish Speaking* English (U.K.)* Portuguese

*Next Line first PP, for CR at MPP +Do you want this changed?Alternate Selections:* Current line* Next line1(Yes / No)(Reference Command 15)*Current L

Do you wish to end? (Yes / No)NO response continues with following set up selections.YES response prints: Save current settings? (Yes / No)YES respons

*10 min.= IR timeoutDo you want this changed? (Yes I No)Alternate Selections:* 20 min* Disabled* 5 sec* 30 sec* 60 sec* 3 min* 10 min(Reference Comman

*3287emulation of SCS command 35 (Reference Command 45)Do you want this changed? (Yes / No)Alternate Selections:* Binary transparent data* 3287 *5 Sec

INTRODUCTIONThe Epson 3270 coax interface card C82314* with PC auto parallel sharing portis an optional Epson interface card. It allows the direct con

*CORIs primary paper tray orientationDo you want this changed? (Yes / No)Alternate Selections:* Portrait* landscape(Reference Command 62)* User Define

APPENDIX C

APPENDIX C

APPENDIX C

APPENDIX c

APPENDIX C

GENERAL SPECIFICATIONSInput Protocol:IBM 3270 coax LU1 or LU3 protocol and Centronicsparallel protocolOutput Protocol:Epson parallel, internal interfa

EPSON’

BUTTON SPECIFICATIONSButtonTopBottomBothFunctionsPA1 response when the PA red LED is onPrints out a page listing when pressed and held for 2 seconds.

INSTALLING THE INTERFACE CARDInstall the coax interface card in the same way as any Epson optional interface.This procedure is explained in detail for