Epson EB-915W Guia do Utilizador descarregar pdf (Página 100)

Moving images are not displayed (only the moving image portion turns black)

Check Remedy

Is the computer's image signal being output to the LCD and the

monitor?

(Only when projecting images from a laptop computer or a

computer with a built-in LCD screen)

Change the image signal from the computer to external output only. Check your computer's documentation, or contact

the computer's manufacturer.

Projection stops automatically

Check Remedy

Is Sleep Mode set to On? Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.

s Extended - Operation - Sleep Mode p.81

"Not supported" is displayed

Check Remedy

Is the image signal format setting correct?

(Only when projecting images from a video source)

Change the setting according to the signal for the connected equipment.

s Signal - Video Signal p.78

Do the image signal resolution and the refresh rate correspond to the

mode?

(Only when projecting computer images)

Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from

the computer.

s "Supported Monitor Displays" p.127

"No Signal" is displayed

Check Remedy

Are the cables connected correctly? Check that all the cables required for projection are securely connected.

s "From Installation to Projection" p.30

Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel.

s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31

Is the power for the computer or video source turned on? Turn the power on for the equipment.

Problem Solving

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 157 158

Sem comentários

Epson EB-915W Guia do Utilizador Página 100