
3.2 DISASSEMBLY AND ASSEMBLY
This section describes how to disassemble and assemble the main components of the scanner. When the
procedure for installing a component in the scanner is simply the reverse of the procedure for removing that
component from the printer, no installation description is given.
3.2.1 Removing the Upper Case
1. Open the document cover, and remove the document cover.
2.
Remove the 2 CBS-tite (M3 × 8) screws and 2 CBP-tite (M3 × 12) screws fixing the upper case.
3. Remove the upper case.
4. Remove the LED board.
3.2.2 Removing the Bottom Plate
1.
Remove 9 CBS-tite (M3 × 6) screws and 8 CBP-tite (M3 × 12) screws.
3. Remove the bottom plate.
CAUTION
Turn the main unit over onto a soft cloth, so that the glass will not be damaged.
CBS-tite (M3x8)
CBP-tite (M3x12)
LED Board
Figure 3-2. Removing the Upper Case
CBP-tite (M3x12)
CBP-tite (M3x12)
CBP-tite (M3x12)
CBS-tite (M3x6)
CBS-tite
(M3x6)
CBS-tite
(M3x6)
Figure 3-3. Removing the Bottom Plate
Disassembly and Assembly GT-5000 / Action Scanner II Service Manual
3-4 Rev. A
Comentários a estes Manuais