Epson CX9400Fax Manual do Utilizador

Epson Stylus CX9475FaxStart Here®

10 Connect Phone CordConnect Phone CordTo use the CX9475Fax for faxing, connect the included phone cord from a telephone wall jack to the LINE port on

Install Software and Set Up the Print Server 112. Secure the print server to the back of the all-in-one using the included hook- and-loop self stick t

12 Install Software and Set Up the Print ServerInstalling Software and Connecting the Print ServerYou need to install the drivers and other software f

Install Software and Set Up the Print Server 13Configuring the Print Server with Easy InstallationFollow these steps to configure the print server and

14 Install Software and Set Up the Print ServerConfiguring the Print Server with Advanced InstallationFollow these steps to configure the print server

Configuring the Print Server and Installing Software for Ad Hoc Mode 15Configuring the Print Server and Installing Software for Ad Hoc ModeFollow the

16 Configuring the Print Server and Installing Software for Ad Hoc Mode9. Select Wireless Setting from the menu on the left.10. Enter a unique name fo

Using the Scanner and Card Reader 17Using the Scanner and Card ReaderBefore you can use your all-in-one’s scanner and card reader, you need to connect

18 Solving ProblemsSolving ProblemsCheck the solutions below if you’re having trouble installing your all-in-one.The print server can’t be found Make

Solving Problems 19 If your wireless access point has MAC address filtering enabled, make sure you added the print server’s MAC address to the list o

2 UnpackUnpackCaution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability

20 Where to Get HelpWhere to Get HelpEpson Technical SupportInternet SupportVisit Epson’s support website at epson.com/support and select your product

Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation. General Notice: Other produc

CPD-25134Printed in USA

Turn On 3Turn On1. Connect the power cable.Caution: Do not connect to your computer yet.2. Press the P On button.

4 Make SettingsMake Settings1. Select your language and country.Press u or d to select the desired option:Press OK when done.2. For the Daylight Time

Make Settings 54. Use the numeric keypad to set the date.5. Press u or d to select the time format, then press r.6. Use the numeric keypad to set the

6 Install Ink CartridgesInstall Ink CartridgesNote: Don’t load paper before installing the ink cartridges.1. Lift up the scanner.2. Open the cartridge

Install Ink Cartridges 75. Insert the cartridges in the holder for each color.6. Press the cartridges down until they click.7. Close the ink cartridge

8 Load Paper9. Press the OK button to charge ink. Charging takes about 2 minutes.Caution: Don’t turn off the CX9475Fax while the On light is flashing

Load Paper 94. Load paper against the right edge guide and behind the tab, with the printable side face up.Note: Don’t load the paper sideways; always