Epson FX-1180+ Manual do Utilizador descarregar pdf

Read This First

If You Want to Use Your

EPSON FX-880+ in Okidata Mode

If you have the EPSON

FX-880+, you can make it work like the

Okidata

Microline

320 Turbo by turning the printer on in a

different mode. In Okidata mode, the printer emulates Okidata

functions, and the following additional settings can be selected in

default setting mode:

The default settings (shown in bold) are consistent with Okidata

Microline 320 Turbo factory settings.

Note: Because the ML 320T does not have a built-in USB interface,

the FX-880+ does not support the USB interface in Okidata mode.

If you want to use your printer in Okidata mode, do not install the

Windows

driver that came with your FX-880+. If you have been

using an Okidata driver, you can continue to use it with your FX-880+

in Okidata mode.

If you have been using an Okidata printer, you may want to print out

its default settings for reference before changing modes on the

FX-880+. To do this on the ML 320T, press SHIFT + SEL to enter

Menu mode, and then press PRINT.

Feature Printer settings in Okidata mode

Software emulation IBM

PPDS, EPSON ESC/P

, OKI ML 320T

Auto tear off wait time 0.5 second, 1 second, 2 seconds, Others

Bottom margin 4.2 mm, 20 mm, 22 mm, 24 mm, Others

Line spacing (lines per inch) 6 LPI, 8 LPI

Paper out override Off (No), On (Yes)

1 2

Read This First 1
Changing Modes 2

Resumo do Conteúdo

Página 1 - Read This First

1 Read This FirstIf You Want to Use Your EPSON FX-880+ in Okidata ModeIf you have the EPSON® FX-880+, you can make it work like the Okidata® Microline

Página 2 - Changing Modes

2 Changing ModesTo enter Okidata mode, make sure the printer is turned off. Then hold down the Tear Off/Bin and Pause buttons while you turn on the pr