Epson PowerLite 825 Manual do Utilizador descarregar pdf

INSTALLATION

HANDBOOK

Lamp and Status Information

Epson PowerLite 85/825/826W

Replacing the Lamp

The life span of the projection lamp is about 5000 hours if

Brightness Control in the Setting menu is set to High (default), and

6000 hours if

Brightness Control is set to Low.

It is time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The message Replace the lamp appears on the screen when the

lamp comes on and the lamp warning light ashes orange. To

maintain projector brightness and image quality, replace the lamp

as soon as possible.

The lamp warning light ashes red (the lamp is burnt out).

Contact your dealer or call Epson at 800-GO-EPSON

(800-463-7766). Request part number V13H010L50.

Replacing the Lamp

1. Turn o the projector.

2. When the P power light stops ashing, unplug the power cord.

3. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

note

When you replace the lamp

for your projector, you

should also replace the lter.

To check how long the lamp

has been in use, see

page 119.

Turn o this product when

not in use to prolong the life

of the projector.

warning

Let the lamp cool fully

before replacing it.

In the unlikely event that

the lamp has broken, small

glass fragments may be

present and should be

removed carefully to avoid

injury.

If the lamp is used after the

replacement period has

passed, the possibility that

the lamp may break

increases. When a lamp

replacement message

appears, replace the lamp

with a new one as soon as

possible, even if it is still

working.

1 2 3 4

Replacing the Lamp 1
INSTALLATION 2

Resumo do Conteúdo

Página 1 - Replacing the Lamp

INSTALLATIONHANDBOOKLamp and Status Information Epson PowerLite 85/825/826WReplacing the Lamp The life span of the projection lamp is about 5000 hour

Página 2 - INSTALLATION

INSTALLATIONHANDBOOKLamp and Status Information Epson PowerLite 85/825/826W4. Loosen the lamp cover screw (you can’t remove it). Then slide the lamp c

Página 3

INSTALLATIONHANDBOOKLamp and Status Information Epson PowerLite 85/825/826W7. Gently insert the new lamp. (If it doesn’t easily, make sure it i

Página 4

INSTALLATIONHANDBOOKLamp and Status Information Epson PowerLite 85/825/826WResetting the Lamp TimerAfter you replace the lamp, you need to reset the l