Epson CMD-2260 (CD-ROM) Informações Técnicas descarregar pdf (Página 111)

__________________________________________________

Blastware Compliance Module

Blastware Operator Manual 4–87

Note: For setting up the UDP/IP or TCP/IP communications protocols it is

suggested that you contact your System Administrator to handle Windows®

Firewall adjustments and router configurations.

8. Refer to the Reports Section. Establish where your data output files will be located once

they are downloaded, and their file format. Additionally, determine the download

location of Event and FFT Report Metafiles and formats, along with the measurement

system to be applied.

9. Proceed to the Start Auto Call Home Section.

10. Use the various testing features to determine that the modem and software configurations

are working in the office prior to locating the system as a field installation.

4.4.3 Description of Commands

a. Setup Unit

Access this dialog by selecting Remote Access Menu > Auto Call Home > Setup Unit. The

Setup Unit command opens the Call Home Setup dialog box. The settings made in the Call Home

Setup dialog box are stored directly on the unit. If you are using Auto Call Home with more than

one monitor, you must set up each monitor individually.

(1) USR Modem or Radio Modem

i Dial-up modem option

If you’re connecting your instrument to a cellular modem or a telephone line modem, then

place a check mark on the Enable Auto Call Home and click on the USR Modem button.

ii IP modem option

If you’re using a Raven modem or any other type of Internet modem or Radio modem, then

place a check mark on the Enable Auto Call Home and then press the Radio Modem button.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 223 224

Sem comentários

Epson CMD-2260 (CD-ROM) Informações Técnicas Página 111