Epson 2100 Manual do Utilizador

ECO-FLO CONTINUOUS INK SYSTEM PermaJet Assembly Instructions for: 2100 Ink System 1Epson 2100 Eco-Flo Shown IMPORTANT If your printer is new, set it

This can be done manually by moving the head to the left and right and checking that there is just enough tubing to allow the print head to move freel

The printer should come on and the head should move back and forth a few times and do a cleaning cycle. When it stops moving, only the green light s

1 ECO-FLO INSTALLATION INSTRUCTIONS FOR ALL TYPES OF PRINTERS AND SYSTEMS 2 TROUBLE SHOOTING GUIDE 3 INK PURGE TEST FILES AND TONE CHARTS 4

• It is advised to gently shake by rotation each ink bottle on a regular weekly basis. This is to ensure the pigments stay suspended in solution and

2 ____________________________________________________________________________________________

If you have a brand new printer, follow the Epson instructions for setting up your printer. Use the Epson injectors that came with the printer. Foll

Fig.2 Step 3 Bottle Preparation Locate the coloured bottle caps and straight lengths of plastic tubes. Insert the straight tube firml

Using a pair of scissors separate all tubes by snipping gently at the tube ends. Please see Fig.4 to the left. Fig.4 5

UB LC C LK Y LM M 2100 Setup Step 7 Assembling the Tubing to the Bottle Caps 6 When you have completed the above

This process is carried out by inserting the 10ml syringe and 7wing adaptor at the base of the injector. PLEASE ENSURE THAT THE WING ADAPTOR (TI

Carefully align them, and when you are happy the injectors are in position. PLEASE BE CAREFUL NOT TO PUSH TOO HARD, AS THIS WILL CAUSE DAMAGE TO THE

9 Next, you will notice that the Tube Support Bracket has both the Hook and Loop Velcro on it. The Hook portion of the Velcro is