Epson TM U295 - B/W Dot-matrix Printer Manual do Operador descarregar pdf (Página 14)

Installation 1-3

TM-U295

You need an appropriate serial interface cable to connect your

computer to the printer.

1. Make sure that the printer and the computer are turned off.

Then plug the cable into the connector on the back of the

printer, as shown.

Note:

Your printer comes with inch-type hexagonal lock screws installed.

If you plan to use an interface cable that requires millimeter-type

lock screws, replace the inch-type screws with the enclosed

millimeter-type screws by using a hex screwdriver (5 mm). To

distinguish the two types of screws, see the illustration below; the

screw on the right is the millimeter type.

TM-T85 / U/G / fig.2-07

95/03/06

Crestec

Notch (one or more lines)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 73 74

Sem comentários

Epson TM U295 - B/W Dot-matrix Printer Manual do Operador Página 14