Epson Stylus Pro 7890 Printer Guia de Início Rápido

Epson Stylus® Pro 7890/9890 QUICK REFERENCE GUIDEPrinted in USACPD-28260Control Panel Lights and ButtonsMenu buttonPaper feed down buttonLeft arrow o

9PRINTER STATUS VERSION Current firmware versionINK LEVEL Percentage of ink remaining in each cartridgeMAINTENANCE TANK Percentage of capacity remaini

NETWORK SETUP NETWORK SETUPDISABLE, ENABLEIP ADDRESS SETTINGAUTO, PANELIP, SM, DG SETTING IP address, subnet mask, default gatewayBONJOURON, OFFINIT N

Where To Get HelpService Access Telephone support Call (888) 377-6611. Make sure you have your Unit ID number. If you experience any difficulty with

Epson Stylus® Pro 7890/9890 QUICK REFERENCE GUIDEPrinted in USACPD-28260Control Panel Lights and ButtonsMenu buttonPaper feed down buttonLeft arrow o

Printer PartsFront Back1Paper basketRoll paper holderFront coverInk bayRoll paper coverControl panelInk bayCastersInterfaceconnector for optiona

Loading Roll Paper1 Open the roll paper cover. 2 Push down the lock lever, then move the roll paper holder to the left.3 Place the roll paper on to

34 Roll the paper forward to the top of the printer.5 Pull up the tension levers, then remove the adapters from the paper roll.6 Place the roll in

41 Remove any roll paper from the paper path. Make sure the printer is turned on and the roll paper cover is closed.2 Press the Paper source butto

Checking and Cleaning the Print Head (continued)Manually Checking and Cleaning the Print Head1 Make sure paper is loaded.2 Press the Menu button.3

Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you ca

5 Make sure the replacement cartridge is the correct color, and remove it from its package. Gently shake the cartridge before installing it.6 Hold t

Replacing Printer Parts (continued)88 Tighten the screw using a cross-head screwdriver. 9 Align the cutter cover, then press it in until it snaps in