Epson TM-T20II Manual do Utilizador descarregar pdf (Página 7)

TM-T20II User’s Manual 7

English

Connecting the Cables

CAUTION:

For a serial interface, use a null modem cable.

For a USB interface, do not turn on the printer before installing the printer driver.

For using an Ethernet (10Base-T/100Base-TX) interface, do not connect a

telephone line or a drawer kick-out cable to the Ethernet connector.

Do not connect to electrical outlets close to devices that generate voltage

fluctuations or electrical noise. In particular, stay clear of devices that use large

electric motors.

Never attempt to stretch the cables to enable a connection. The power cable

must have adequate slack at all times during use.

1. Make sure the printer is turned off.

2. Connect the interface cable to the printer.

For the shape of each connector, see the illustration below. (Mounted

interfaces vary by the printer model.)

Note:

When connecting the USB cable, fix the USB cable with the hook shown in the illustration

below to prevent the cable from coming off.

3. Connect the interface cable to the computer.

4. Connect the AC cable to the AC adapter.

㻌

RS-232

10BASE-T/

100BASE-TX

(Drawer kick-out

connector)

DC24V

USB

Hook

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sem comentários

Epson TM-T20II Manual do Utilizador Página 7