
- PRINTHEAD MAINTENANCE KIT -
- PRINTHEAD MAINTENANCE KIT -
C
Remove the lm from the rear of the head cleaning mat.
D
Place the edge of the head cleaning mat (as shown by the circled part
in the following illustration) against the center of the roller on the side
where the paper is fed from, and then lay the mat down flat in the
center of the printing mount (within the diagonal lines shown in the
illustration).
Note:
The print head will not be cleaned if the head cleaning mat is placed outside the diagonal
lines shown in the illustration above. Make sure the mat is inside the diagonal lines.
Comentários a estes Manuais