Epson ActionPrinter-2000 Manual do Utilizador descarregar pdf (Página 89)

Options

This section describes problems you may encounter while using an

option with your printer.

When you use the cut-sheet feeder, the paper does not feed

properly.

•

When a print command is sent from the computer, the

platen rotates but paper does not feed.

Make sure DIP switch

1-8 is set on. See the section on DIP

switches in Chapter

The cut-sheet feeder may be incorrectly installed on the

printer.

See that the paper-release lever is pushed back to the

single-sheet position.

You may have loaded too many sheets in the cut-sheet

feeder’s bin.

Paper may be jammed near the print head.

There may be only one sheet left in the bin. Add more

paper.

• Two or more sheets feed at one time.

You may have loaded too many sheets in the cut-sheet

feeder’s bin.

You may have forgotten to fan the stack of paper before

loading it into the bin. Remove the paper and fan it.

6-10

Troubleshooting

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 126 127

Sem comentários

Epson ActionPrinter-2000 Manual do Utilizador Página 89