Epson PowerLite W16 Guia do Utilizador descarregar pdf (Página 117)

Power light Lamp light Temp light Status and solution

Red Off Red Projector has overheated and turned off. Leave

it turned off to cool down. Once the Temp light

turns off and the power light turns orange (after

about five minutes), try the suggestions below:

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• Clean or replace the air filter.

• If operating the projector at high altitude, turn

on High Altitude Mode.

• If the problem persists, unplug the projector

and contact Epson for help.

Red Flashing red Off Lamp has a problem.

• Check to see if the lamp is burned out,

broken, or installed incorrectly. Reseat or

replace the lamp as necessary.

• Clean or replace the air filter.

• If operating the projector at high altitude, turn

on High Altitude Mode.

• If the problem persists, unplug the projector

and contact Epson for help.

Light status Flashing orange Off Replace the lamp soon to avoid damage. Do

varies not continue using the projector.

Red Off Flashing red A fan or sensor has a problem. Turn the

projector off, unplug it, and contact Epson for

help.

Red or flashing Flashing red Flashing red Internal projector error. Turn the projector off,

red unplug it, and contact Epson for help.

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and

contact Epson for help.

Parent topic: Solving Problems

117

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 187 188

Sem comentários

Epson PowerLite W16 Guia do Utilizador Página 117