Epson PowerLite Pro Cinema 800 HQV Guia de Instalação descarregar pdf

Follow these instructions to set up the Epson PowerLite

Pro Cinema projector and HQV Video Processor

1. Unpack the projector and video processor. Attach the serial number sticker included with

the video processor to the User Manual for that product.

2. Choose a location for the projector as described in the projector User’s Guide.

3. Connect an HDMI cable from the video processor to the projector.

4. If you want the video processor to be able to turn the projector on or off, connect an

9-pin, null-modem RS-232 cable from the video processor to the projector.

5. Plug in the power cord for the video processor. Make sure batteries are installed in the

video processor remote control.

6. Turn on the power switch on the back of the video processor (above the AC power inlet).

Installer Guide

®®

HDMI OUT

Video processor

Projector

RS-232 (SLAVE)

1 2 3 4

Resumo do Conteúdo

Página 1 - Installer Guide

Follow these instructions to set up the Epson PowerLite Pro Cinema projector and HQV Video Processor1. Unpack the projector and video processor. Att

Página 2 - Turn on the

27. After a few moments, the display on the front of the unit should show Output=720P 60Hz. If it does not, press the POWER button on the remote contr

Página 3 - Menu button

311. Focus and zoom the image using the focus and zoom rings.12. Position the image using the lens shift dials.Caution: Do not try to move the lens by

Página 4 - Select

15. Press the HDMI button on the projector remote to select HDMI as the input source.16. Press the Color Mode button. Use the u and d buttons to selec