Epson EB-G6050W Guide Guia do Utilizador descarregar pdf (Página 90)

Troubleshooting

Problem Solving

Reading the Indicators

You can check the status of the projector from the flashing and lit , (operation indicators),

and

on the control panel.

Refer to the following table to check the projector's status and how to remedy problems shown by the

indicators.

Indicator status during an error/warning

: Lit : Flashing : Status maintained : Off

Indicators Status Remedy

(blue)/(orange)

Replace Lamp

It is time to replace your lamp. Replace the lamp with a new

lamp as soon as possible.

s p.106

The lamp may explode if you continue to use it in this status.

(blue)/(orange)

High Temp Warning

You can continue projecting. If the temperature rises too high

again, projection stops automatically.

•

If the projector is installed next to a wall, make sure there is at

least 20 cm between the wall and the projector's exhaust vent.

•

If the air filter is clogged, clean it. s p.102

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 122 123

Sem comentários

Epson EB-G6050W Guide Guia do Utilizador Página 90