Epson 1925W - POWERLITE Multimedia Projector Guia do Utilizador descarregar pdf (Página 110)

6. To allow the remote control to operate any compatible projectors again (ID number is zero), repeat

the steps above and set the remote control ID number to 0.

Parent topic: Projector Identification System for Multiple Projector Control

Matching Multiple-Projector Display Quality

You can match the display quality of multiple projectors that will project next to each other.

1. Turn on all the projectors on which you want to match the display quality.

2. Set ID numbers on each projector.

3. Make sure all the projectors are using the same Color Mode setting.

4. It is best to match two projectors at a time, so set the remote control ID to match the first projector.

5. Press the Menu button, select the Extended menu, and press Enter.

6. Select the Multi-screen setting and press Enter.

7. Set the Adjustment Level setting to 1 and press Enter.

8. Set the remote control ID to match the second projector.

9. Access the Extended menu Multi-screen setting on the second projector and set the Adjustment

Level setting to 1.

10. Adjust the Brightness Correct. setting on the projector with the darkest display so it matches the

lighter display, and press Enter. (You may need to switch the remote control ID back and forth to

make adjustments to each projector in all of these steps.)

110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 197 198

Sem comentários

Epson 1925W - POWERLITE Multimedia Projector Guia do Utilizador Página 110