Epson BrightLink 480i Guia do Utilizador

BrightLink®475Wi/480i/485WiUser's Guide

Adjusting Projector FeaturesFollow the instructions in these sections to use your projector's feature adjustments.Shutting Off the Picture and So

Note: You can also stop video action using the interactive pens.1. Press the Freeze button on the remote control to stop the video action.2. To restar

• To pan around the zoomed image area, use the arrow buttons.• To zoom out of the image, press the E-Zoom – button as necessary.• To return to the ori

Setting a PasswordTo use password security, you must set a password.1. Hold down the Freeze button on the remote control until you see the Password Pr

6. Press Esc to return to the Password Protect menu.7. Make a note of the password and keep it in a safe place in case you forget it.Parent topic: Pas

You must enter the correct password to use the projector.1. Hold down the Num button on the remote control while you enter the password using the nume

Saving a User's Logo Image to DisplayYou can transfer an image to the projector and then display it whenever the projector turns on. You canalso

Note: It takes a few moments for the projector to save the image; do not use the projector, its remotecontrol, or any connected equipment until it is

3. Select the Control Panel Lock setting and press Enter.4. Select one of these lock types and press Enter:• To lock all of the projector's butto

Creating a User Pattern to DisplayYou can transfer an image to the projector and then display it as a pattern to aid in presentations whenyou use the

BrightLink 475Wi/480i/485Wi User 's GuideWelcome to the BrightLink 475Wi/480i/485Wi User's Guide.11

Using the Interactive PensThe BrightLink interactive pens turn any wall into an interactive whiteboard, either with or without acomputer.• With a comp

1 Pen tip2 Attachment for optional strap or cord3 Battery light4 Power switch5 Battery cover1. To turn on the pen, slide the power switch.The green li

Related tasksReplacing the Pen BatteriesCalibrating AutomaticallyCalibration coordinates the positioning of the pen with the location of your cursor.

2. Select the Easy Interactive Function setting and press Enter.3. Select Auto Calibration and press Enter.4. Adjust the focus if necessary, by openin

The cursor location and pen position should match after calibration. If not, you may need to calibratemanually.Parent topic: Using the PensRelated tas

2. Select the Easy Interactive Function setting and press Enter.3. Select Manual Calibration and press Enter.4. Adjust the focus if necessary, by open

The circle disappears, and you see another circle lower than the first one.Note: For the most accurate calibration, make sure you touch the center of

Parent topic: Using the PensRelated tasksCalibrating AutomaticallyUsing BrightLink With a ComputerYou can connect a computer to the projector and inst

Adjusting the Pen Operation AreaThe pen operation area is normally adjusted automatically if you connect a different computer or adjustthe computer&ap

4. Select Advanced and press Enter.5. Select Manual Adj. Pen Area and press Enter.6. Press Enter to select Yes.The mouse pointer moves toward the top

Introduction to Your ProjectorRefer to these sections to learn more about your projector and this manual.Projector FeaturesNotations Used in the Docum

Easy Interactive ToolsYour projector came with a CD containing the Easy Interactive Tools software for use with a computer.Easy Interactive Tools lets

Requirement Windows MacOperating system Windows XP Professional, Home Mac OS X 10.4.x, 10.5.x, 10.6.x, orEdition, and Tablet PC Edition (32-bit); 10.7

Note: In Mac OS X, you will need to restart after installing the software.122

Parent topic: Easy Interactive ToolsStarting and Exiting Easy Interactive ToolsMake sure Easy Interactive Tools is installed on your computer, and the

Note: The illustration shows the interactive mode toolbar on the left, and the whiteboard modetoolbar on the right. You can select the Close icon to h

Using the Easy Interactive Tools for Interactive ModeYou can use the pen as a mouse and add annotations to your presentations or other work displayedf

Undo multiple operations (one at a time)Redo multiple operations (one at a time)Page up in a browser or other software programPage down in a browser o

3. Tap on the projected field where you want to enter text.4. Select the letters and numbers on the on-screen keyboard.Parent topic: Using the Easy In

3. Select the camera you want to use from the drop-down list.4. Do one of the following to work with the image if necessary:• To search among connecte

1. Select the Magnifier tool.You see a window like this:2. Drag the Magnifier window to the area you want to enlarge.3. Do the following to adjust the

• Wired network support for projection• Projector monitoring and control via remote network computer• Optional wireless network support, including vid

Change custom pen color and widthWrite or draw with custom penChange highlighter pen color and widthWrite or draw with transparent highlighter penWrit

Toggle between hiding the toolbar after use and showing it continuouslyMinimize the toolbarExit Easy Interactive ToolsParent topic: Using Easy Interac

Using the Easy Interactive Tools for Whiteboard ModeYou can write or draw on a blank surface, add background images, and save your pages. Follow thein

Undo multiple operations (one at a time)Redo multiple operations (one at a time)Display a list of pages currently being editedOpen a new pageInsert an

2. Select the line width, color, and shape you want to create, or select the Line tool to define yourown shape.3. Drag the pen on the projection surfa

Display a spotlight effect that hides most of the image and reveals a circular area. Drag thespotlight frame to reveal different parts of the image.Co

2. Do one of the following:• To keep the page list open, select the icon.• To close the page list, select the X in the upper right corner.Parent topic

current screen with annotations in interactive mode, or all the pages in the current session in whiteboardmode.You can also select other locations and

5. Select the location, file name, and file type for saving annotation mode and whiteboard mode pages.Easy Interactive Tools will automatically add th

9. Select the location and file type and enter a file name using the on-screen keyboard if necessary.10. Select Save.Parent topic: Using Easy Interact

1 Projector2 Remote control3 Remote control batteries (two AA alkaline)4 Pens and batteries (one AA alkaline battery for each pen)5 USB cable6 Power c

3. Select the toolbar size, page list display position, and spotlight shape.4. If you want to change the language, select the Language settings tab, t

Parent topic: Using the Interactive PensEnabling Windows Tablet PC and Ink FeaturesIf you want to use the Tablet PC and Ink features in Windows 7 or V

3. Select Number of Pen Users and press Enter.4. Select One User and press Enter.5. Press Esc on the remote control to return to the Easy Interactive

You can select from a variety of Ink Tools:• To annotate your PowerPoint slides in Slideshow mode, press and hold the pen against the projectionsurfac

Using the Built-in ToolbarYou can use either pen with the built-in toolbar, but not both pens at the same time.1. Press one of the Source buttons on t

In the following illustration, the annotation mode tools are shown on the left, and the whiteboard modetools on the right:Switch to annotation mode145

Switch to whiteboard modeUndo the last annotationRedo the last undoFreeze/continue video actionSelect a white or black background or one of 4 patterns

Clear all annotationsHide the toolbar after each annotationClose the toolbarParent topic: Using BrightLink Without a ComputerZooming Images Using the

2. If you want to change the background, do the following:• Select the Background tool.• Select a black background or one of 4 different patterns.• Se

Adjusting the Menu SettingsFollow the instructions in these sections to access the projector menu system and change projectorsettings.Using the Projec

Related conceptsProjector ConnectionsAdditional ComponentsDepending on how you plan to use the projector, you may need to obtain the following additio

2. Press the up or down arrow buttons to move through the menus listed on the left. The settings foreach menu are displayed on the right.Note: The ava

To change settings for an input source, make sure the source is connected and select that source.Setting Options DescriptionColor Mode See the list of

Setting Options DescriptionAuto Iris On Adjusts the projected luminancebased on the image brightnessOffwhen certain Color Modes areselectedNote: The B

Setting Options DescriptionAuto Setup On Automatically optimizescomputer image quality (whenOffOn)Resolution Auto Sets the input signal resolution ifn

Setting Options DescriptionInput Signal Auto Specifies the signal type frominput sources connected toRGBcomputer portsComponentAuto: detects signalsau

Setting Options DescriptionKeystone H/V Keystone Adjusts image shape torectangular (horizontally andQuick Cornervertically)H/V Keystone: lets you manu

Setting Options DescriptionPointer Shape Three shapes available Changes the shape of the remotecontrol pointer featurePower Consumption Normal Selects

Setting Options DescriptionPattern Pattern Display Selects various pattern displayoptionsPattern TypePattern Display: lets you displayUser Patternthe

Setting Options DescriptionDisplay Messages Selects various display optionsDisplay Background Messages: controls whethermessages are displayed on theS

Setting Options DescriptionOperation Direct Power On Selects various operation optionsSleep Mode Direct Power On: lets you turnon the projector withou

Option or part Part numberAir filter replacement (ELPAF40) V13H134A40Wireless LAN module (ELPAP07) V12H418P12Quick Wireless Connection USB key (ELPAP0

Setting Options DescriptionUSB Type B Easy Interactive Function Selects what happens when youconnect your computer to theUSB Display/Easy Interactivep

Setting Options DescriptionEasy Interactive Function Auto Calibration Selects various options related tointeractive pen operationManual CalibrationThe

Setting Options DescriptionNet. Info - Wireless LAN Connection mode Displays wireless network statusand detailsAntenna levelProjector NameSSIDDHCPIP A

Setting Options DescriptionNetwork Configuration Accesses additional network Configures your network settingsmenusParent topic: Adjusting the Menu Set

Information item DescriptionResolution Displays the resolution of the current input sourceVideo Signal Displays the video signal format of the current

Event ID code Cause and solution0481 Communication with computer was disconnected. Restart the EasyMP NetworkProjection program.0483 The EasyMP Networ

You cannot reset the following settings using the Reset All option:• Input Signal• User's Logo• Language• Network menu items• Lamp Hours• Passwor

Maintaining and Transporting the ProjectorFollow the instructions in these sections to maintain your projector and transport it from place to place.Pr

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe theprojection window.Warning: Do not use a lens cleane

Cleaning the Projector CaseBefore cleaning the projector case, turn off the projector and unplug the power cord.• To remove dust or dirt, use a soft,

Option or part Part number4:3 Height-adjustable wall mount for ultra-short throw projectors V12H4570191-Year Extended Depot Repair Service Plan EPPFTP

2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such asa paintbrush).Note: You can remove the air filter s

2. Slide the air filter cover switch and open the air filter cover.171

3. Pull the air filter out of the projector.Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.172

4. Place the new air filter in the projector as shown.173

5. Close the air filter cover.Parent topic: Air Filter and Vent Maintenance174

Projector Lamp MaintenanceThe projector keeps track of the number of hours the lamp is used and displays this information in theprojector's menu

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lampcover.4. Slide off the lamp cover.176

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.6. Lift up the lamp handle and gently pull the lamp ou

7. Gently insert the new lamp into the projector along the guide rail. If it does not fit easily, make sure itis facing the right way. Press the handl

9. Replace the lamp cover and tighten the screw to secure it.Note: Be sure the lamp cover is securely installed or the lamp will not come on.Reset the

View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24hours a day.• If you still need help after checking this

3. Select the Reset menu and press Enter.4. Select Reset Lamp Hours and press Enter.You see a prompt asking if you want to reset the lamp hours.5. Sel

1. Open the battery cover as shown.2. Remove the old batteries.Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid gett

4. Close the battery cover and press it down until it clicks into place.Warning: Dispose of used batteries according to local regulations. Do not expo

2. Remove the old battery.Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid onyour hands. If it get

1. Twist off the tip of the pen to remove it.2. Twist on the new tip.Parent topic: Projector MaintenanceRelated referencesOptional Equipment and Repla

Solving ProblemsCheck the solutions in these sections if you have any problems using the projector.Projection Problem TipsProjector Light StatusUsing

1 Power light2 Lamp light3 Temperature lightPower light Lamp light Temperature Status and solutionlightGreen Off Off Normal operation.Flashing green O

Power light Lamp light Temperature Status and solutionlightRed Off Red Projector has overheated and turned off. Leave itturned off to cool down for fi

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, andcontact Epson for help.Parent topic: Solvin

Solutions When Only a Partial Image AppearsSolutions When the Image is Not RectangularSolutions When the Image Contains Noise or StaticSolutions When

1 Remote control receiver2 Speaker3 Control panel4 Cable cover screw5 Cable cover6 Exhaust vent7 Lamp cover screw8 Lamp coverParent topic: Projector P

Related tasksUnlocking the Projector's ButtonsSolutions When Image is Incorrect Using the USB Display FunctionIf no image appears or if the image

Displaying From a PC LaptopIf you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop todisplay on

Supported Video Display FormatsSolutions When Only a Partial Image AppearsIf only a partial computer image appears, try the following solutions:• Pres

Correcting Image Shape with the Keystone ButtonsAdjusting the Image PositionSolutions When the Image Contains Noise or StaticIf the projected image se

• Adjust the Sharpness setting to improve image quality.• If you are projecting from a computer, press the Auto button on the remote control to automa

Solutions When There is No Sound or Low VolumeIf there is no sound when you expect it or the volume is too low, try the following solutions:• Adjust t

Solving Projector or Remote Control Operation ProblemsCheck the solutions in these sections if you have problems operating the projector or remote con

• Make sure you are operating the remote control within the reception angle and range of the projector.• Check to see if a button on the remote contro

Solutions When Manual Calibration is DifficultSolutions When the Built-In Toolbar Does Not WorkSolutions When the Interactive Pen Position Is Not Accu

• If you are projecting from a computer, make sure the USB cable is connected to the computer andprojector.• Dim the room lights and turn off any fluo

1 Filter cover switch2 Security cable installation slot3 Wireless LAN light4 Interactive pen receiver5 Obstacle sensor6 Remote receiver7 Projection wi

• Press one of the Source buttons on the remote control to select the source for the image you want toannotate. To use a blank screen, select Computer

Solutions When the Interactive Pens Cause Interference or Unwanted EffectsIf the pens are causing interference or unwanted effects, try the following

Speak to a Support RepresentativeTo use the EPSON PrivateLine Support service, call (800) 637-7661. This service is available for theduration of your

Technical SpecificationsThese sections list the technical specifications of your projector.General Projector SpecificationsProjector Lamp Specificatio

BrightLink 480i:Normal Power Consumption mode:White light output 3000 lumens (ISO 21118 standard)Color light output 3000 lumensECO Power Consumption m

Internal sound system 16 W monauralNoise level 35 dB (Normal Power Consumption mode)28 dB (ECO Power Consumption mode)Keystone correction angle Vertic

Batteries Two alkaline or manganese AAParent topic: Technical SpecificationsProjector Dimension SpecificationsHeight (excluding feet) 5.6 inches (143

Power consumption Operating:(220 to 240 V) BrightLink 475Wi:Normal Power Consumption mode: 275 WECO Power Consumption mode: 215 WBrightLink 480i/485Wi

Supported Video Display FormatsFor best results, your computer monitor or video card resolution should be set to display in theprojector's native

Display format Refresh rate (in Hz) Resolution (in pixels)Composite videoTV (NTSC) 60 720 × 480TV (SECAM) 50 720 × 576TV (PAL) 50/60 720 × 576Componen

5 Computer2 port6 Monitor Out port7 Network (LAN) port8 USB-A port9 USB-B port10 HDMI port11 RS-232C port12 Audio Out port13 Power inlet14 L-Audio-R a

Display format Refresh rate (in Hz) Resolution (in pixels)HDTV (720p) 50/60 1280 × 720HDTV (1080i) 50/60 1920 × 1080HDTV (1080p) 24/30/50/60 1920 × 10

NoticesCheck these sections for important notices about your projector.RecyclingImportant Safety InformationImportant Safety InstructionsFCC Complianc

Important Safety InstructionsFollow these safety instructions when setting up and using the projector:• Do not look into the lens when the projector i

• Do not operate the projector in a closed-in cabinet unless proper ventilation is provided.• Never push objects of any kind through the cabinet slots

• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do notbring your hands or face close to the vents while proj

Parent topic: Important Safety InstructionsFCC Compliance StatementFor United States UsersThis equipment has been tested and found to comply with the

Wireless Telegraphy Act RegulationsThe following acts are prohibited by the Wireless Telegraphy Act:• Modifying and disassembling (including the anten

See the GNU General Public License for more details.The list of GPL Programs is as follows and the names of author are described in the source code of

this service if you wish), that you receive source code or can get it if you want it, that you can change thesoftware or use pieces of it in new free

You may charge a fee for the physical act of transferring a copy, and you may at your option offerwarranty protection in exchange for a fee.2. You may

Projector Parts - Base1 Ceiling mount holes (3)2 Security cable attachment point3 Rear foot attachment holes (2)4 Wall mount plate holes (5)5 Front fo

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge nomore than your cost of physically perfor

For example, if a patent license would not permit royalty-free redistribution of the Program by all thosewho receive copies directly or indirectly thr

PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

Gnomovision version 69, Copyright ©) year name of authorGnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is freesof

The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU LesserGeneral Public License Version 2 at http://www.gnu.org/l

To protect each distributor, we want to make it very clear that there is no warranty for the free library.Also, if the library is modified by someone

GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING,DISTRIBUTION AND MODIFICATION0. This License Agreement applies to any software libr

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an applicationprogram that uses the facility, other

5. A program that contains no derivative of any portion of the Library, but is designed to work with theLibrary by being compiled or linked with it, i

library, if the user installs one, as long as the modified version is interface-compatible with the versionthat the work was made with.c) Accompany th

Projector Parts - Control Panel1 Projector status lights2 Source Search button (searches for connected video sources)3 Enter button (selects options)4

10. Each time you redistribute the Library (or any work based on the Library), the recipient automaticallyreceives a license from the original licenso

by the Free Software Foundation, write to the Free Software Foundation; we sometimes makeexceptions for this. Our decision will be guided by the two g

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without eventhe implied warranty of MERCHANTABILITY or FITNE

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation

2. You can use this software for whatever you want. You don't have to pay us.3. You may not pretend that you wrote this software. If you use it i

config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freelydistributable.It appears that the arith

libpng version 1.2.6, September 12, 2004 , is Copyright (c) 2004 Glenn Randers -Pehrson, and isdistributed according to the same disclaimer and licens

For the purposes of this copyright and license, "Contributing Authors" is defined as the following set ofindividuals:Andreas DilgerDave Mart

zlibThis projector product includes the open source software program "zlib" which applies the terms andconditions provided by owner of the c

M M M M mDNSResponder-107.6 M (only mDNSResponderPosix is used)License terms "Apache License Version 2.0, January 2004" are as follows.Apach

Projector Parts - Interactive Pens1 Pen tip2 Attachment for optional strap or cord3 Battery light4 Power switch5 Battery coverParent topic: Projector

of electronic, verbal, or written communication sent to the Licensor or its representatives, including butnot limited to communication on electronic m

from the Work, provided that such additional attribution notices cannot be construed as modifying theLicense.You may add Your own copyright statement

To apply the Apache License to your work, attach the following boilerplate notice, with the fieldsenclosed by brackets "[]" replaced with yo

3. the name of the copyright holder is not used to endorse products built using this software withoutspecific written permission.DISCLAIMERThis softwa

* Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.* Redistributions in bina

LUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALLIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL LUCENT

Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.Developed at SunPro, a Sun Microsystems, Inc. business. Permission to use, copy, modi

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;OR BUSIN

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation

All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted providedthat the following conditio

Projector Parts - Remote Control1 Power button25

(17) S. L. MoshierAuthor: S. L. Moshier.Copyright (c) 1984,2000 S.L. MoshierPermission to use, copy, modify, and distribute this software for any purp

1. Redistributions of source code must retain the above copyright notice, this list of conditions and thefollowing disclaimer.2. Redistributions in bi

results of the use of, the software and documentation in terms of correctness, accuracy, reliability,currentness, or otherwise; and you rely on the so

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation

All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted providedthat the following conditio

(32) - Andrey A. Chernov (targets using libc/posix)Copyright (C) 1996 by Andrey A. Chernov, Moscow , Russia .All rights reserved.Redistribution and us

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDINGNEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS S

* Neither the name of CodeSourcery nor the names of its contributors may be used to endorse orpromote products derived from this software without spec

* from this software without specific prior written permission.** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS* "AS IS&quo

Copyright AttributionParent topic: NoticesA Note Concerning Responsible Use of Copyrighted MaterialsEpson encourages each user to be responsible and r

2 Computer button (cycles through connected computer sources)3 Video button (cycles through connected video sources)4 Numeric buttons (enter numbers)5

Setting Up the ProjectorFollow the instructions in these sections to set up your projector for use.Projector PlacementInstalling the Projector FeetRem

Mounted vertically on a table to create an interactive workspace.Front projection from a table or portable cartWherever you set up the projector, make

Parent topic: Projector PlacementProjection DistanceThe distance at which you place the projector from the screen determines the approximate size of t

ContentsBrightLink 475Wi/480i/485Wi User's Guide... 11I

Diagonal Min. ceiling Image width Image height Min. projection Distance from topimage height distance of image to wallsize plate52 inches 75.8 inches

Diagonal Min. ceiling Image width Image height Min. projection Distance from topimage height distance of image to wallsize plate88 inches 101.4 inches

Diagonal Min. ceiling Image width Image height Min. projection Distance from topimage height distance of image to wallsize plate70 inches 84.3 inches

Installing the Projector FeetTo use the projector on a table or cart, you first need to install the feet. You can then use the feet toadjust the image

2. Slide off the cable cover.To attach the cable cover, slide it into position, then tighten the screws.Parent topic: Setting Up the ProjectorProjecto

• For slide shows without a computer, you can connect USB devices (such as a flash drive or camera)or an optional EPSON document camera.Caution: If yo

USB Display will slow interactive pen function. For the best performance, VGA or HDMI connections arerecommended.1. Turn on your computer.2. Connect t

Connecting to a Computer for VGA VideoYou can connect the projector to your computer using a VGA computer cable.Note: To connect a Mac that includes o

2. Connect the other end to the projector's HDMI port.Parent topic: Connecting to Computer SourcesConnecting to a Computer for Pen Use or USB Mou

Related referencesProjector Setup Settings - Extended MenuProjector Parts - Remote ControlConnecting to a Computer for SoundIf your computer presentat

Connecting to Video Sources ... 39Connecting to a

Connecting to an HDMI Video SourceIf your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.The HDMI con

If your image colors appear incorrect, you may need to change the Input Signal setting in the projector'sSignal menu.Parent topic: Connecting to

2. Connect the other end to the projector's S-Video port.Parent topic: Connecting to Video SourcesConnecting to a Video Source for SoundYou can p

Parent topic: Connecting to Video SourcesConnecting to an External Computer MonitorIf you connected the projector to a computer using a Computer port,

2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.3

Parent topic: Projector ConnectionsConnecting to External USB DevicesFollow the instructions in these sections to connect external USB devices to the

2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB-Aport shown here.Note: Do not connect a USB hub

Connecting to a Document CameraYou can connect the EPSON DC-06 document camera to your projector's USB-A port to project imagesviewed by the came

1. Open the battery cover as shown.2. Insert the batteries with the + and – ends facing as shown.48

3. Close the battery cover and press it down until it clicks into place.Warning: Dispose of used batteries according to local regulations. Do not expo

Controlling a Networked Projector Using a Web Browser ... 67Crestron RoomView Support..

2. Insert the battery with the + and – ends facing as shown.3. Replace the battery cover and press it down until it clicks into place.Parent topic: Se

Using the Projector on a NetworkFollow the instructions in these sections to set up your projector for use on a network.Note: To use the interactive p

Connecting to a Wired NetworkTo connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T networkcable. To ensure proper

3. Select the Network menu and press Enter.4. Select Network Configuration and press Enter.5. Select the Basic menu and press Enter.6. Select the foll

• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using thePJLink protocol for projector control.• Web Control Pas

10. To prevent display of the IP address on the standby screen, turn off IP Address Display.11. When you finish selecting settings, select Complete an

Parent topic: Using the Projector on a NetworkRelated referencesOptional Equipment and Replacement PartsInstalling the Wireless LAN ModuleTo use the p

3. Insert the wireless LAN module into the port.4. Replace the cable cover and tighten the screws.5. Plug in and turn on the projector.Parent topic: W

You see a projected message that the network information update is complete.3. Remove the USB key.4. Now connect the USB key to a USB port on your com

2. Press the Menu button.3. Select the Network menu and press Enter.4. Select Network Configuration and press Enter.5. Select the Basic menu and press

Starting a Slide Show ... 97Slideshow

6. Select the following basic options as necessary:• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify theproject

Parent topic: Wireless Network ProjectionWireless LAN Menu SettingsNote: See your projector's EasyMP Network Projection Operation Guide for detai

Setting Options DescriptionIP Settings DHCP (On or Off) Selects DHCP if your networkassigns addresses automatically,IP Addressor turns off DHCP so you

Parent topic: Wireless Network ProjectionSetting Up Wireless Network SecurityYou can set up security for your projector to use on the wireless network

Parent topic: Wireless Network ProjectionWireless Security Menu SettingsSettings on the Security menu let you select the type of security and security

Parent topic: Setting Up Wireless Network SecuritySetting Up Projector Network E-Mail AlertsYou can set up the projector to send you an e-mail alert o

9. When you finish selecting settings, select Complete and follow the on-screen instructions to saveyour settings and exit the menus.Note: If a critic

4.5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.Note: Do not use these addresses: 127.x.x.x or

Note: The web setup and control features support Microsoft Internet Explorer 6.0 or later, and Safari onnetworks that do not use a proxy server for co

4 Freeze button control5 A/V Mute button control6 Page Up and Page Down button controls7 Searches for sources8 Selects the network source9 Selects the

Selecting Line Width and Color With Easy Interactive Tools... 131Using the Easy Interactive Tools for

Note: If you want to use the Crestron RoomView system when the projector is turned off, you need toadjust the Standby Setup settings in the Extended m

3. Select the input source that you want to control in the Sources List box. You can scroll throughavailable sources using the up and down arrows in t

Using Basic Projector FeaturesFollow the instructions in these sections to use your projector's basic features.Turning On the ProjectorTurning Of

1. Connect the power cord to the projector's power inlet.2. Plug the power cord into an electrical outlet.The projector's power light turns

If you do not see a projected image right away, try the following:• Turn on the connected computer or video device.• Insert a DVD or other video media

3. To transport or store the projector, make sure the power light is orange (but not flashing), thenunplug the power cord.Caution: To avoid damaging t

Adjusting the Image HeightIf you are projecting from a table or other flat surface, and the image is too high or low, you can adjustthe image height u

4. If the image is tilted, rotate the rear feet to adjust their height.If the projected image is unevenly rectangular, you need to adjust the image sh

Correcting Image Shape with the Keystone ButtonsYou can use the projector's keystone correction buttons to correct the shape of an image that isu

3. Press a keystone button on the projector's control panel to adjust the image shape.Note: The horizontal keystone adjustment buttons are labele

Air Filter and Vent Maintenance ... 169Cleaning the Air

Related referencesProjector Feature Settings - Settings MenuCorrecting Image Shape with Quick CornerYou can use the projector's Quick Corner sett

6. Use the arrow buttons on the projector or the remote control to select the corner of the image youwant to adjust. Then press Enter.7. Press the arr

Parent topic: Image ShapeResizing the Image with the Wide and Tele Buttons1. Turn on the projector and display an image.2. To enlarge the image size,

1. Turn on the projector and display an image.2. Adjust the image size using the Wide and Tele buttons.After you adjust the image size, the Image Shif

Parent topic: Using Basic Projector FeaturesRelated referencesProjector Feature Settings - Settings MenuRemote Control OperationThe remote control let

1 19.7 feet (6 m)2 ± 30º3 ± 55º4 ± 60º5 ± 75º6 ± 15ºNote: Avoid using the remote control in conditions with bright fluorescent lights or in direct sun

Using the Remote Control as a Wireless MouseYou can use the projector's remote control as a wireless mouse so you can control your computerpresen

Related referencesProjector Setup Settings - Extended MenuUsing the Remote Control as a Presentation PointerYou can use the projector's remote co

• Press the button for the source you want on the remote control. If there is more than one port forthat source, press the button again to cycle throu

• Rear flips the image horizontally to project from behind a translucent screen.Note: The two Rear modes cannot be used with the interactive pens.You

Solutions When "Hardware Device Not Found" Message Appears ... 198Solutions When "Error Occur

3. Select the Extended menu and press Enter.4. Select the Projection setting and press Enter.5. Select a projection mode and press Enter.6. Press Menu

Changing the Image Aspect RatioYou can change the aspect ratio of the displayed image to resize it.1. Turn on the projector and switch to the image so

Aspect ratio setting DescriptionFull Displays images using the full width of the projection area, but doesnot maintain the aspect ratio.Zoom Displays

Changing the Color ModeYou can change the projector's Color Mode using the remote control to optimize the image for yourviewing environment.1. Tu

Color Mode DescriptionBlackboard Best for presentations onto a green chalkboard (adjusts the colorsaccordingly)Whiteboard Best for presentations onto

5. Press Menu or Esc to exit the menus.Parent topic: Color ModeControlling the Volume with the Volume ButtonsThe volume buttons control the projector’

Related conceptsUSB Device ProjectionRelated tasksConnecting a USB Device or Camera to the ProjectorSlideshow FeaturesYour projector's Slideshow

Starting a Slide ShowAfter connecting a USB device to the projector, you can switch to the USB input source and start yourslide show.Note: You can cha

• To display a slide show of all the images in a folder, press the arrow buttons to highlight theSlideshow option at the bottom of the screen and pres

Setting Options DescriptionSort Order In Ascending Sorts files in first-to-last orderIn Descending Sorts files in last-to-first orderContinuous Play O